manualshive.com logo in svg

Baroness LM56GC, Руководство по эксплуатации для владельца

Поделиться
Скачать
Baroness LM56GC Скачать руководство пользователя страница 20

Sound Pressure Level

LM56

Sound Pressure Level

This machine was confirmed to have a
continuous A-weighted sound pressure level
of 87 dB by measuring identical machines in
accordance with the procedure specified in
ISO 5395-1:2013.

LM66

Sound Pressure Level

This machine was confirmed to have a
continuous A-weighted sound pressure level
of 87 dB by measuring identical machines in
accordance with the procedure specified in
ISO 5395-1:2013.

Sound Power Level

LM56

Sound Power Level

This machine was confirmed to have a
sound power level of 98 dB by measuring
identical machines in accordance with the
procedure specified in ISO5395-1:2013.

LM66

Sound Power Level

This machine was confirmed to have a
sound power level of 98 dB by measuring
identical machines in accordance with the
procedure specified in ISO5395-1:2013.

￭

￭

￭

￭

Vibration Level

LM56

Hand-Arm Vibration

This machine was confirmed not to exceed a
vibration level of 2.5 m/s

2

 to hands and arms

by measuring identical machines in
accordance with the procedure specified in
ISO 5395-1:2013.

LM66

Hand-Arm Vibration

This machine was confirmed not to exceed a
vibration level of 2.5 m/s

2

 to hands and arms

by measuring identical machines in
accordance with the procedure specified in
ISO 5395-1:2013.

Carbon Dioxide (CO

2

) Emissions

Measurement

For CO

2

 emissions measurement on Honda

engine, refer to the following website.
http://www.honda-engines-eu.com/co2-engines
This CO

₂

 measurement results from testing

over a fixed test cycle under laboratory
conditions of a(an) (parent) engine
representative of the engine type (engine
family) and shall not imply or express any
guarantee of the performance of a particular
engine.

￭

￭

LM56GC

・

LM66GC / LM66TC

Product Overview

Page 3-8

Specifications

Содержание LM56GC

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды