Baroness LM531, Руководство по эксплуатации для владельца, Страница: 84 / 96

Adjusting the Neutral Position of the Piston
Pump
Caution
Make sure not to touch rotating tires.
Caution
When adjusting the neutral position, pay close
attention to abrupt start of the machine.
Place the jacks beneath the jack-up points,
and then lift the machine until all the tires get
off the ground.
If the machine moves forward or backward
while the traveling pedals are released, they
are not set to the neutral position.
Follow the steps below to make adjustments.
Stop the engine.
Place the jacks beneath the jack-up points,
and then lift the machine off the ground.
"Jack-Up Points" (Page 5-8)
Make sure that no tires get contact with the
jack stand.
Start the engine, and rev it up to the
maximum rpm.
Adjust the neutral position.
Loosen the lock nuts.
Rotate the traction adjusting cam slowly
until all wheels stop.
If the tires move in the direction of
forward travel, rotate the traction
adjusting cam clockwise.
If the tires move in the direction of
backward travel, rotate the traction
adjusting cam counterclockwise.
Find the position where all tires stop,
and then, while holding the traction
adjusting cam in place, secure it with
the lock nut.
1.
2.
3.
4.
5.
[1]
[2]
･
･
2
1
hsn2jo-012
Adjusting the Neutral Position of the Piston Pump_001
1 Lock nut
2 Traction adjusting cam
Check that the tires do not move. 6.
LM531
Maintenance
Page 5-16
Maintenance Work