Baroness LM531, Руководство по эксплуатации для владельца, Страница: 66 / 96

Cutting Work
Cutting Operation
Warning
Do NOT start to move or stop the machine
abruptly.
Caution
Cutting work must be performed at an
appropriate speed for the site and location.
When cutting bumpy surfaces, keep the
engine rpm steady, and slow down the cutting
speed.
Caution
Please note that if you stop operating the
mower unit up/down lever before the mower
units are raised completely, reel rotation may
not stop.
Reel rotation will be turned on or off based on
the sensor-detected position of the mower
units.
Important
Perform cutting work with the mower unit up/
down lever shifted to the "DOWN" position.
Reel rotation will be turned off if the mower
unit up/down lever shifted to the "NEUTRAL"
or "UP" position.
Important
Do NOT start to move or stop the machine
abruptly.
It will damage the hydraulic system or result in
oil leakage.
Shift the reel rotation/stop switching levers of
all mower units to the "Rotate" position.
Start the engine.
"Procedure to Start Engine" (Page 4-19)
Depress the brake pedal to release the
parking brake.
Shift the throttle lever to the "High speed"
position, and rev up the engine to MAX.
Right before starting cutting work, set the
anti-falling stop valve to the "Open" position. 1.
2.
3.
4.
5.
Release the mower lock levers (latches) for
mower units #4 and #5.
Shift the mower unit up/down lever to the
"DOWN" position to lower the mower units.
Set the reel rotation switch to the "Rotate"
position to rotate the reel cutters (cutting
cylinders) for all mower units.
Depress the traveling pedal to start cutting
work.
Removal/Installation of Grass Catcher
Caution
Stop the engine before removing or installing
the grass catcher.
Set the reel rotation switch to the "Stop"
position.
Lower the mower units.
Apply the parking brake.
Stop the engine.
Remove or install the grass catcher.
Removal of grass catcher:
Lift up the grass catcher, and remove the
mounting pins on the left and right of the grass
catcher from the grass catcher mounting
brackets.
Installation of grass catcher:
Install the mounting pins on the left and right
sides of the grass catcher into the grass
catcher mounting brackets.
Mower units #2 & 3
Note
：
The illustration shows the mower unit #3. Right
and left positions of the grass catcher mounting
brackets differ according to the location of a
mower unit.
2
2
3
1
3
bos35l-011
Removal/Installation of Grass Catcher_001
6.
7.
8.
9.
1.
2.
3.
4.
5.
LM531
Handling Instructions
Page 4-36
Cutting Work