−33−
11-6 Opening and closing the engine hood
Disconnect the rubber catch in right and left,
and pull up the engine hood upwards until
the wire stretches to the limit. When you
close the engine hood, lower it slowly.
Rubber catch
Caution
●
When you close the engine hood, be careful not to pinch your
hand.
●
Do not open the engine hood at the windy place.
11-7 Opening and closing the seat undercover
Raise the tilt steering column to the upper
position first, and then move the seat to the
rear end position. Pull up the lever behind
the seat to release the lock, and then raise
the seat and open the undercover. To close
the undercover, lower it slowly.
Seat
Lever
Caution
●
When you close the undercover, be careful not to pinch your
hand.
11-8 Adjustment of brake
Danger
●
Make sure that the brake wire is not cracked or damaged.
Important
●
If the brake is not sufficiently effective due to a wider clearance
gap between the brake disc and the brake lining, adjust the
clearance.
●
The wire is used for fine adjustments.
Important
●
Adjust the brake with the brake lining.
The brake lining wear limit is 3.0 mm (0.12 in).
Caution
●
Make sure that the lever is maintained in the open position
(neutral).
1) For each wheel, fully tighten the
adjustment bolt on the brake disc side.
Brake lining
Brake disc
Lever
Adjustment bolt
(on brake disc side)
Open (neutral)
