Baroness LM101, Руководство по эксплуатации для владельца, Страница: 58 / 88

Maintenance Item
Before Work
After Work
Every 10 hrs. Every 20 hrs. Every 25 hrs. Every 50 hrs.
Every 100 hrs. Every 300 hrs. Every 500 hrs.
Every year
Every 2 years
When Required
Remarks
Cutting section
Replace grass catcher roller oil
seals
△
Replace grease inside gearcase
△
Adjust cutter adjustment spring
○
Backlap blades ○
Regrind blades (Reel cutter)
○
Grind/Replace blades
as and when required
*1: Consult your local Baroness Dealer for this service.
*2: Refer to the Engine's Owner's Manual.
The values for consumables are not guaranteed.
Adjusted Values
Cutter adjustment spring 43.0 mm (1.69 in) Total length of spring
Reel cutter shaft bearing preload
spring
11.5 mm (0.453 in) Total length of spring
Reel cutter rotation torque 0.8 - 1.0 N
・
m (8 - 10 kgf
・
cm)
Engine clutch 0.5 - 1.0 mm (0.020 - 0.039 in)
Gap between engine clutch and
clutch facing
Operation distance of clutch plate 1.0 - 2.0 mm (0.039 - 0.079 in)
Engine clutch spring 61.0 mm (2.40 in) Total length of spring
･
･
･
LM101
Maintenance
Page 5-6
Maintenance Schedule