Baroness LH62, Руководство по эксплуатации для владельца

Страница: 40 / 45

Sharpening of Reel Cutter (Cutting
Cylinder)
The sharpening of the reel cutter (cutting
cylinder) consists in maintaining its roundness
and creating a relief (second edge face).
This work should be performed if the
sharpness cannot be restored, even after back
lapping, or if the relief (second edge face) has
worn away.
Sharpen the reel cutter (cutting cylinder) when
the sharpness cannot be restored, even after
back lapping, or when the relief (second edge
face) has worn away, there is full contact or
back lapping takes too much time.
In addition, if the reel cutter (cutting cylinder)
becomes worn and its shape conical, perform
cylindrical grinding to return it to a cylindrical
shape.
For sharpening the reel cutter (cutting
cylinder), contact your dealer or Baroness
unless you have a grinding machine.
Caution
Both the reel cutter (cutting cylinder) and the
bed knife (bottom blade) are edged tools.
Handle them carefully, since they could cut
your hands and feet.
Caution
Wear gloves when touching edged tools to
avoid cutting your hands.
The criteria for sharpening the reel cutter
(cutting cylinder) are described below.
However, these criteria are only a reference
and do not guarantee performance of a reel
cutter (cutting cylinder).
If the outer diameter of the reel cutter
(cutting cylinder) after sharpening is more
than the usage limit, the reel cutter (cutting
cylinder) can be sharpened. 1.
New Usage limit
Dimension A
(Outer
diameter of
reel cutter
(cutting
cylinder))
Dimension B
(Distance
from blade
edge to
outer edge
of reel cutter
(cutting
cylinder)
shaft)
Dimension A
(Outer
diameter of
reel cutter
(cutting
cylinder))
Dimension B
(Distance
from blade
edge to
outer edge
of reel cutter
(cutting
cylinder)
shaft)
163 mm
(6.42 in) 68.8 mm
(2.71 in) 143 mm
(5.63 in) 58.8 mm
(2.31 in)
Note:
The outer diameter of the reel cutter (cutting
cylinder) shaft is 25.4 mm (1.00 in).
B
A
1
2
3
ok5ueg-006
Sharpening of Reel Cutter (Cutting Cylinder)_001
1 Reel cutter (cutting cylinder) blade
2 Reel cutter (cutting cylinder) disc
3 Reel cutter (cutting cylinder) shaft
A
Outer diameter of reel cutter (cutting
cylinder)
B
Distance from blade edge to outer
edge of reel cutter (cutting cylinder)
shaft
LH62
・
LH66
Maintenance
Page 5-8
Maintenance Work