Baroness LH62, Руководство по эксплуатации для владельца

Страница: 29 / 45

1 Bolt
2 Nut
3 Brush
4 Rear roller
Adjustment of CR Brush (installed together with
Groomer)
Note:
Depending on the specifications, this function
may not be available.
Important
Do not place the brush in contact with the rear
roller too tightly.
It will cause belt slip and break.
Important
The rotating CR brush prevents grass
clippings, etc., from attaching to the rear roller.
Loosen the left and right bolts and nuts
used to install the CR brush.
Adjust the CR brush so that there is a
clearance of 0 to 1.0 mm (0 to 0.039 in)
between it and the rear roller, and then
firmly tighten the loosened bolts and nuts.
1
2
4
3
zp6tso-002
Adjustment of CR Brush (installed together with
Groomer)_001
1 Bolt
2 Nut
3 Brush
4 Rear roller
1.
2.
Adjustment of Scraper
Adjustment of Front Scraper
Note:
Depending on the specifications, this function
may not be available.
Important
Do not place the scraper in contact with the
front roller too tightly.
It will cause deformation of the scraper and
damage of the front roller.
The scraper prevents grass clippings, etc.,
from attaching to the front roller.
Loosen the left and right bolts and nuts of
the scraper.
2
3
4 5
1
t4n31r-002
Adjustment of Front Scraper_001
1 Scraper
2 Bolt
3 Washer
4 Spring washer
5 Nut
Adjust the scraper so that there is a
clearance of 2.0 to 3.0 mm (0.079 to 0.118
in) between it and the outer diameter
surface of the front roller, and then firmly
tighten the loosened bolts and nuts.
A
1
2
t4n31r-003
Adjustment of Front Scraper_002
1.
2.
Handling Instructions
LH62
・
LH66
Handling Instructions
Page 4-13
Adjustment before Work