31
RAMP AND SOAK MODE
If you selected Ramp and Soak during the setup, the following screen will
appear (refer to Figure 53).
XX.X °F
SEG X
XX_XX_XX
RAMP
V
FIGURE 53. TEMPERATURE/TIME/SEGMENT DISPLAY
FOR RAMP/SOAK MODE
During the ramp and soak operation, the temperature, segment number, time
remaining, and status (i.e., RAMP or SOAK) will be displayed.
To advance to the next segment, press and hold down the RUN/STOP key
until the displayed segment number advances (about 3 seconds).
Setpoint or time remaining can be displayed by pressing the SET key.
Mainbook.p65
10/9/01, 7:03 AM
31
