10
2.
Press the DOWN arrow key to select one of the three sensor types,
which are described as follows:
Thermocouple
1. To select a thermocouple type, press the MENU key (refer to Figure 8).
2. The screen will display the last thermocouple selected. To chose an-
other thermocouple type, press the DOWN arrow key to move forward
or, if passing a desired selection, the UP arrow key to move backward.
Thermocouple selections include: K, J, E, B, T, S, R, and N.
3. Select the thermocouple type by pressing the MENU key. To ensure
proper operation, be sure that the correct thermocouple type is con-
nected at the thermocouple jack before running the program.
THERMOCOUPLE
TYPE J
FIGURE 8. THERMOCOUPLE SELECTION SCREEN
Thermistor
1.
The second sensor type available is the thermistor. Press the MENU key
at the SENSOR TYPE - THERMISTOR screen to display the following
screen (refer to Figure 9).
2.
Use the UP or DOWN arrow key to chose either YSI 400 or YSI 700
thermistors.
3.
After selecting the correct thermistor, press the MENU key.
THERMISTOR
YSI 400
FIGURE 9. THERMISTOR SELECTION SCREEN
