33
Security
level
Password
Several security levels can be chosen:
Users may make the following settings without the password:
ON/OFF
– allows to turn the unit on or off.
ON/OFF, Temp., Flow
- Allows to turn the unit on or off, set the
required temperature and air flow.
Temp., Flow
- allows to set the required temperature and air
flow.
Full
- Does not allow any settings without password
User mode
- The unit can be turned on or off and the required
temperature and air flow can be set. without password.
After entering the password, the unit can be fully con-trolled and set.
Should the password be lost the unit can be accessed via the Master
Code: 12341360
MENU 25 - FACTORY RESET
01 - Mode
15 - Modbus RTU
21 - Network
25 - Factory reset
23 - User lock
Pressing FACTORY RESET restarts the unit
with the factory parameters
The following settings remain unchanged:
- Settings like AQS
- Ventilation mode
- HW settings
- Temperature sensor
- ModBus settings
Lock screen
Protection level
without
25 - Factory parameters
Back to default parameters
25 Factory parameters
21 - Network parameters
FACTORY RESET
The MODBUS menu is used to set the Modbus communication.
MENU 21 - NETWORK
18 - HW test
20 - Modbus RTU
21 - Network
25 - Factory reset
23 - User lock
The NETWORK is used to set the unit's network communica-
tion (ModBus TCP)
MENU 23 - USER LOCK
01 - Mode
20 - Modbus RTU
21 - Network
25 - Factory reset
23 - User lock
18 - Test mode
25 - Factory parameters
21 - Network parameters
21 - Network parameters
Network parameters
IP address
Mask
Gate
20 - Modbus RTU
20 - Modbus RTU
7. INITIAL COMMISSIONING
