6
|
T3-OPPAD
TFT Remote Keypad IP55 User Guide |
Version 1.02
www.
bardac
.com
Switching Frequency
Reduction
Mains Loss
Maintenance
Time Elapsed
Name
01 Name
01 Name
01 Name
01
SF
23.7Hz
ML
23.7Hz
OL
23.7Hz
23.7Hz
15.3A
15.3A
6.9kW
15.3A
6.9kW
15.3A
6.9kW
Switching frequency is
reduced, due to high
heatsink temperature.
The incoming mains
power supply has been
disconnected or is missing.
The motor is in overload
drawing a current higher
than its rated current.
The user programmable
maintenance reminder time
has elapsed.
Changing Parameters
Name
01 Name
01 Name
01 Name
01 Name
01
Stop
P1-01
P1-08
30.0A
P1-08
Stop
15kW 400V 3Ph 50.0Hz
30.0A
P1-08
30.0
3.0 30.0A
15kW 400V 3Ph
Press and hold the
Navigate key > 2
seconds.
Use the Up and
Down keys to
select the required
parameter.
Display will
show the present
parameter value on
the lower line of the
display.
Press the Navigate
key for < 1 second.
Adjust the value
using the Up
and Down keys.
Display will show
the maximum and
minimum possible
settings on the
lower line of the
display.
Press for < 1 second
to return to the
parameter menu.
Press for > 2
seconds to return
to the operating
display.
Parameter Factory Reset / User Reset
Factory Parameter Reset :
User Parameter Reset :
Name
01 Name
01 Name
01 Name
01 Name
01 Name
01
Stop
P-Def
Stop
Stop
U-Def
Stop
15kW 400V 3Ph 50.0Hz
15kW 400V 3Ph P1-08
30.0
3.0 30.0A
15kW 400V 3Ph
Press and hold the
Up, Down, Start
and Stop keys for
>2s.
The display shows
P-def. Briefly press
the Stop key.
The display
returns to Stop. All
parameters are
reset to Factory
defaults.
Press and hold the
Up, Down and Stop
keys for >2s.
The display shows
U-def. Briefly press
the Stop key.
The display
returns to Stop.
All parameters
are reset to User
Defaults.
