background image

Manual   2100-366

Page    7

4.B POSSIBLE EMERGENCIES AND

RECOMMENDED ACTIONS

1.

Possible Emergency

:  Smelling gas or other

unfamiliar smell; or not knowing what may be
wrong or that to do about it.

ACTION:  

For your safety –

a. Leave your house or building immediately.

b. Go to a neighbor’s or another building.

c. Use their telephone.

d. Call your gas supplier.  Tell them you smell

gas and give them your name and address.

e. If you cannot reach gas supplier, call fire

department.

2.

Possible Emergency

:  Your thermostat is set

below room temperature; yet even though the

blower is on, the air coming from your room
registers continually gets hotter.

ACTION:

a. Turn room thermostat to its lowest or OFF

setting.

b. If you can do so safely, turn gas off.  Use

manual shut-off valve at gas meter or on

propane (LP) gas tank.  You may need a

wrench or tools.  If you can safely turn off

electricity at the main circuit panel, do so.

If you cannot do these things safely, leave

your home or building immediately.  Call

your gas supplier or fire department from a

neighbor’s phone for help.

3.

Possible Emergency

:  Your thermostat is set

above room temperature.  The blower is on but

the air coming from your room registers is hot,
then cold, then hot, then cold in a continuing
cycle. This condition indicates lack of airflow
through furnace.

ACTION:

a. Make sure air filter is clean and installed

correctly.

b. Check that registers and return air grilles are

open and unobstructed.

c. If condition continues, call your local

qualified service technician or gas supplier.

4.

Possible Emergency

:  While furnace is operating,

you smell unfamiliar odors that go away when
furnace is off.

ACTION:

a. Turn thermostat to its lowest or OFF setting.

b. Move gas valve control level to OFF.

c. If blower is not operating, immediately turn

off electricity to furnace using shut-off
device near furnace or at main circuit panel.

d. If blower is operating, wait five minutes for

furnace to cool down and then turn off
electricity to furnace using shut-off device
near furnace or at main circuit panel.

e. Call your local qualified service technician

or gas supplier.

          WARNING

 

Three important 

things not to do

 –

1.  Don’t try to light any gas
     appliances.
2.  Don’t touch any electrical switches
3.  Don’t use the telephone in your
     house  or building.

Any of the above may cause a spark which
could cause a fire or explosion resulting in
damage, personal injury or death.

      WARNING

If gas or electricity is off due to an
emergency, only a qualified installer,
service agency or gas supplier should turn
it back on.  Doing it yourself could result in
damage, injury   or death.

      

WARNING

Unfamiliar odors may mean gas or
aldehydes are present which could result in
damage, injury or death.

Содержание WG-Series
















Отзывы: