background image

         WARNING

Read and follow all safety information in this manual, operating instructions and

furnace safety labels.  Failure to follow safety precautions could result in damage,

injury or death.

• Do not store or use gasoline or other flammable vapors and liquids in the

       vicinity of  this or any other appliance.
• WHAT TO DO IF YOU SMELL GAS
    • Do not try to light any appliance.
    • Do not touch any electrical switch; do not use any phone in your building.
    • Immediately call your gas supplier from a neighbor's phone.  Follow the gas
        supplier's instructions.
    • If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified installer or the gas

      supplier.

          WARNING

If the information in this manual is not followed exactly, a fire or explosion may

result causing property damage, personal injury or loss of life

IMPORTANT SAFETY NOTE:  You must know how to turn off gas and electricity to air conditioner/gas
furnace.  Your qualified installer, service agency or gas supplier can teach you to use controls and switches.

Thank you for reading these safety statements.  Please read on so you will know

how to maintain your air conditioner/gas furnace for years of dependable service.

We're pleased you've chosen our air conditioner/gas furnace to supply your cooling/heating needs.  Please
keep this manual in a safe, yet readily available place.  It contains important and useful information.

ATTENTION, INSTALLER:  After installing air conditioner/gas furnace, give the user:

• User's Information Manual

• Parts List

• Installation Instructions

• Warranty Information

ATTENTION, USER!  Your installer should give you the above four important documents relating to your
air conditioner/gas furnace.  Keep these as long as you do your equipment.  Pass these documents on to later
purchasers or furnace users.  If any of the four documents are missing or damaged, contact your installer or
manufacturer for replacement.  For efficient service, please give your unit model and serial number, from
Section 1 or from your serial rating plate.

USER'S INFORMATION MANUAL

WG-Series Combination Gas/Electric Wall-Mount

Manual:

2100-366A

Supersedes:

2100-366

File:

Vol I, Tab 20

Date:

07-10-00

BARD MANUFACTURING COMPANY
Bryan, Ohio 43506

Since 1914...Moving ahead, just as planned.

         WARNING

Do not use this air conditioner/gas furnace if any part has been under water.  Immedi-

ately call a qualified service technician to inspect the unit and to replace any part of the

control system and any gas control which has been underwater.

Содержание WG-Series
















Отзывы: