Manual 2100-614K
Page
19 of 61
MC4000 HVAC Monitor / Controller
h. Comfort Mode
i. Restore System Defaults
j. Reset Controller. There are built-in routines
to prevent the controller system from getting
“locked up”, but this also allows a manual
remote reset as a backup before having a
service call to the site.
Notes Page
This screen provides a place to leave notes about the
site for the technician or engineer.
Users Page
1. The designated Admin person can assign up to
nine additional users and set up as Admin, Write or
Read authority.
2. User name and password must be assigned. Each
must be at least three characters long and are case
sensitive.
3. Only “Admin” can add, change or delete users and
has access to all controller pages.
4. “Write” can make changes to the controller settings
and operating characteristics and has access to
only Log In, System Status, Setpoints and Log Out
pages.
5. “Read” can only view Status and Setpoints pages
and cannot make any changes.
Notification Setup Page
MC4000 HVAC Monitor / Controller
The notification setup page is used to determine which
alarms are remotely communicated to the offsite
monitoring systems. The CB5000 Series has the
capability to communicate using SNMP v2 protocol as
well as email notifications for specific events.
Email Notifications
To enable email notifications, ensure that the check box
is checked next to “Enable SMTP” and “Enable SNMP”
even if traps are not going to be used. After the feature
is enabled, the controller needs to be configured
with the SMTP Server name, the port, username and
password. This information will need to be provided by
the network administrator from where the controller will
be installed.
SMTP Server
– This is the IP address of the SMTP
Server.
Port
– The configured port for the SMTP Server.
User Name
– The username used to authenticate with
the server.
Password
– The password used to authenticate with the
server.
Once the server settings have been entered, the
destination for the notification can be set and the
message customized to include relevant information.
From
– Enter the email address that the email
notification should come from.
