Barco UDX 4K32, Руководство пользователя

Страница: 11 / 82

1. Safety
On servicing
• Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage potentials
and risk of electric shock.
• Refer all servicing to quali fi ed service personnel.
• Attempts to alter the factory-set internal controls or to change other control settings not specially discussed in this manual can
lead to permanent damage to the projector and cancellation of the warranty.
• Remove all power from the projector and refer servicing to quali fi ed service technicians under the following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the equipment.
- If the product has been exposed to rain or water.
- If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper adjustment of the other controls may result in damage and will often
require extensive work by a quali
fi ed technician to restore the product to normal operation.
- If the product has been dropped or the cabinet has been damaged.
- If the product exhibits a distinct change in performance, indicating a need for service.
• Replacement parts: When replacement parts are required, be sure the service technician has used original Barco replacement
parts or authorized replacement parts which have the same characteristics as the Barco original part. Unauthorized substitu-
tions may result in degraded performance and reliability,
fi re, electric shock or other hazards. Unauthorized substitutions may
void warranty.
• Safety check: Upon completion of any service or repairs to this projector, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
Stacking/transporting UDX rental fl ight cases
• Stack maximum 2 rental fl ight cases high. Never higher.
• Surface on which fl ight case is standing must be level to ensure that the total load is evenly spread out among the four wheels.
The surface must also be able to support the load safely.
• Before stacking or transporting fl ight cases, check the wheels and their fi xation screws for wear or defects.
• Before stacking or transporting fl ight cases, check that the four lock handles on each fl ight case are in good working order and
locked securely.
• When stacked, make sure the wheels of the upper fl ight case are precisely positioned in the stacking dishes of the
fl ight case
below.
• Stacked fl ight cases may not be moved. Before stacking, the lower fl ight case must already be in its fi nal resting position before
placing the second upon it.
• Never stack loaded fl ight cases in a truck or other transport medium, unless each fl ight case is rigidly strapped tight.
• In the event of a wheel breaking, fl ight cases must be rigidly strapped tight to prevent a stack collapsing.
• Use an appropriate forklift to raise fl ight cases and take the necessary precautions to avoid personnel injury.
1.3 Product safety labels
Light beam related safety labels
Label image Label description Label location
Hazard RG3: not for household use symbol.
Hazard RG3: optical radiation warning symbol.
WARNING! DO NOT LOOK INTO THE LIGHT BEAM NO DIRECT EYE EXPOSURE TO
THE BEAM IS PERMITTED. RG3 IEC EN 62471–5:2015. CLASS 1 IEC EN 60825–1:2014.
HAZARD DISTANCE: CONSULT SAFETY MANUAL.
R5906112 UDX SERIES 24/05/2017 7