CHAPTER 2
SolaSpot LED Setup and Configuration
SolaSpot LED
TM
User Manual
13
Terminate the link by installing a 120 ohm, 1/4 watt
(minimum) terminator in the fixture’s Data Out
(female) cable connector in the last fixture on each
DMX link.
To construct a terminator:
1. Disassemble a male 3-pin or 5-pin XLR connector.
2. Solder a 120 ohm resistor, minimum of 1/4 watt, between Pin 2 and Pin 3.
3. Reassemble the XLR connector.