CHAPTER 4
Preset Programming
SolaSpot LED
TM
User Manual
33
Preset Menu
Playback Settings
Preset programming requires one fixture to act as the Master. All other SolaSpot LED fixtures on
the link can then be set as slaves to playback the Master presets. Slave fixtures receive all their
preset parameter and timing information from the master fixture.
Playback settings designate a fixture as a master or a slave and also allow you to revert from Auto
Programming to DMX control from a console or set a fixture in Master or standalone mode for
audio control.
Automatic Program Run
This Playback option lets you designate a fixture to playback in Standalone mode or as a Master.
Alone
is the default setting.
To designate a fixture as a Master:
1. Navigate to and select the
Preset
menu as shown on
page 33
.
2. Use the
buttons to scroll to
Playback
menu and press
to select.
3. Use the
buttons to scroll to
Auto Program
menu and press
to select.
4. Use the
buttons to scroll to
Master
and press
to select. Your choice will be
shown in the display.
Set to Slave
After a preset program is defined on a Master fixture, other SolaSpot LED fixtures on the same
DMX link can be designated slaves to playback Program Part 1, 2 or 3 as defined on the Master
fixture, see
Select Program
on page 36.
To designate a fixture as a Slave:
1. Navigate to and select the
Preset
menu as shown on
page 33
.
2. Use the
buttons to scroll to
Playback
menu and press
to select.
3. Use the
buttons to scroll to
Set To Slave
menu and press
to select.
4. Use the
buttons to scroll to
Slave1
,
Slave2
, or
Slave3
option and press
to
select. Your choice will be shown in the display.
DMX Control
Selecting this option reverts the function from
Auto Program
(Preset Programming) to
DMX
Receive
(console control). Selecting this option will take you back to the menu startup screen
where
DMX Receive
will be displayed as the currently selected function.
Music Control
This Playback option lets you designate a fixture to playback scenes based on audio triggers
detected by the internal microphone in stand alone or as a Master.
Alone
is the default setting.
