![background image](http://html1.mh-extra.com/html/barco/r9004460/r9004460_owners-manual_4265878036.webp)
3. Connections
RS232/422 Serial Network IN
4TXC+
Data Terminal Ready (DTR)
9
Ring Indicator (RI)
5 GND
Signal Ground (GND)
-
RS232/422 Serial Network OUT
1
-
6 RXB+
Data Set Ready (DSR)
2 RXB-
Receive Data (RD or RX or RXD)
7
-
3 TXB-
Transmitted Data (TD or TX or TXD)
8
-
4TXB+
Data Terminal Ready (DTR)
9
-
5 GND
Signal Ground (GND)
-
-
3.4.2
Ethernet connection
Connection
Connect port 1 or port 2 to a LAN by using a straight cable or a crossed cable. The connection is a 10/100 baseT.
MONITOR OUT
2
1
3
PUSH
2
1
3
PUSH
HARDWIRED REMOTE
10/100 BASE T
SERIAL NETWORK
MONITOR OUT
RS232/422 OUT
RS232/422 IN
WIRELESS REMOTE
CTRL 3
CTRL 2
CTRL 1
PORT 1
PORT 2
BI-DIRECTIONAL
UNI-DIRECTIONAL
Image 3-20
Ethernet connection
The projector must have an IP address and the IP address of the connected PC must be within the same range of IP addresses.
Once getting access, it is possible to check and manipulate all projector settings. Remote diagnostics, control and monitoring be-
come very simple.
The 2 ports are functionally identical. Both ports are connected via the projector hub.
Pin configuration
Ethernet 10/100 base T Port 1 & 2
1
TXD+
5
++2.5VA
2
TXD-
6
RXD-
3
RXD+
7
RXD-
4
++2.5VA
8
GNDM
3.4.3
Hardwired remote to CTRL 1
How to connect
1. Plug one end of the remote cable in the connector on the bottom of the RCU. (image 3-21)
2. Plug the other end in the connector in the input panel of the projector labelled CTRL 1.
32
R59770014 XLM HD30 07/07/2006
Содержание R9004460
