Barco R9004460 Скачать руководство пользователя страница 23

Страница: 23 / 133

2. Installation Guidelines

2.10 Charging the batteries of the rugged remote control

2.10.1 Preparing the charger

What can be done ?

The charger can be fitted with one of the four supplied power plugs.

Image 2-15
Possible power plugs

For Australia

For US/Japan

Europe

How to mount the correct plug ?

1. Pull the plug to be changed upwards until it is completely removed from the charger. (image 2-16)

2. Place the plug to be mounted on the charger and guide it downwards by using the guiding slots. (image 2-17)

3. Push the plug downwards until it clicks and is locked into the charger. (image 2-18)

4. Check if the plug is well locked.

It must not stick out of the charger.

Image 2-16
Remove plug

Image 2-17
Guiding grooves

Image 2-18
Mounting the plug

2.10.2 Charging the batteries

When charging the batteries

Charging is required whenever the batteries are low. The status of the batteries can be seen on the main menu (third line) or in the
diagnosis menu.

BAT=ACT

The remote is working on batteries, there is no supply via external power source.

BAT=LOW

The batteries are running low

Possible ways to charge the batteries

The batteries can be charged in one of the following ways :
•

Via the battery charger

•

Via the XLR connection with the projector when the projector is in standby or in operational mode.

How to charge via the adapter ?

1. Plug the female power connector of the charger into the male connector at the right side of the remote control.

R59770014 XLM HD30 07/07/2006

Содержание R9004460






































































































































Результаты поиска

Содержание R9004460

Отзывы:

Бренды по названию

Популярные бренды

Barco R9004460, Руководство пользователя

Результаты поиска

Содержание R9004460

Отзывы:

Бренды по названию

Популярные бренды