Barco R9004460, Руководство пользователя

Страница: 37 / 133

3. Connections
Specifications of the CTRL 1 input:
- U
in
= 9V
- I
max
= 80 mA
• Internal IR receiver can be disabled:
o
mono jack : on plug in of the jack
o
stereo jack : on plug in or using an external switch bringing the right channel (B) to ground level. (image 3-22)
2 1
3
PUSH
2 1
3
PUSH
COLOR
CONTRAST
PHASE
SHARPN TINT
BRIGHTN
STANDBY
ENTER
TEXT
EXIT
PAUSE
2 1
4 3
5 6
8
0 9
7
OK
IR
GREEN : OPERATIONAL
RED : STAND-BY
Image 3-21
Hardwired RCU
1
2
A B C
D
2
3
1
Image 3-22
Stereo jack pin configuration
A tip : left channel
B ring : right channel
C screen : common (GND)
D external switch
1
Stereo jack
2 Mono jack
The Remote connection uses a standard two wire cable terminated on each end with a 3.5 mm male
(mono/stereo) phone jack.
This cable is not delivered but is available in most electronic or audio shops.
3.4.4 Bi-directional communication port, CTRL 3
What can be connected
The rugged remote control can be connected to the Bi-directional communication port CTRL 3.
With this rugged remote control all control functions can be taken over. The LCD panel on this rugged remote displays the same
information as the panel on the projector itself.
R59770014 XLM HD30 07/07/2006 33