![background image](http://html1.mh-extra.com/html/barco/r9002370/r9002370_owners-manual_4229649042.webp)
Service Mode
7 - 4 ___________________________________________________________________________________ R5975809 BARCO CINE 6
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWERUP MODE : Standby
COMMON ADDRESS : 0
BARCO LOGO
or
<EXIT> to return
then <ENTER>
Select with
PROJECTOR SET-UP
IDENTIFICATION
TOTAL RUN TIME
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJECTOR ADDRESS
CHANGE BAUDRATE
POWERUP MODE : Standby
COMMON ADDRESS : 0
BARCO LOGO
Change Projector Address
Every projector requires an individual address between 0 and 255.
This address can be software installed.
To change the address, use the arrow keys to highlight
CHANGE PROJECTOR ADDRESS
and then press
ENTER
.
The Change Projector Address menu will be displayed and the actual current address will be displayed.
The first digit is highlighted. Select the individual digits using the arrow keys. Reprogram with the digit keys on the RCU.
Press
ENTER
to confirm. Press
EXIT
to return to the
PROJECTOR SETUP
menu.
Change Baud Rate
The communication speed between projector and computer has 8 possible speeds. The baud rate can be setup through software.
Highlight
CHANGE BAUD RATE
using the arrow keys and then press
ENTER
to display the
BAUDRATE
selection menu.
The following baud rates are available :
-
9600
-
4800
-
2400
-
1200
-
600
-
300
-
150
-
110
BAUDRATE
Select new baudrate :
9600
4800
2400
1200
600
300
150
110
<EXIT> to return
<ENTER>to accept
Select with arrow keys ;
PROJECTOR ADDRESS
Enter new projector
address :
0 0 0
and
<EXIT> to return
<ENTER> to confirm
Use
to select,
and reprogram
with numeric keys
Highest address is 255
CHANGE PROJECTOR
ADDRESS
Projector address will
be changed to 000
<ENTER> to confirm
<EXIT> to cancel
The current baud rate will be highlighted in the menu. To change the baud rate, use the arrow keys to select the desired baud
rate and press
ENTER
to accept this baud rate.
Pressing
EXIT
in this menu returns to
PROJECTOR SETUP
menu.