![background image](http://html1.mh-extra.com/html/barco/r9002370/r9002370_owners-manual_4229649031.webp)
R5975809 BARCO CINE 6 ___________________________________________________________________________________
6-5
Random Access Adjustment Mode
Raster Shift Adjustment
The green raster must be centered both horizontally and vertically on the center of the CRT surface. To center the green raster,
look into the green lens and use the arrow keys on the RCU to move the raster.
CAUTION :
It is necessary to look into the lenses to perform these adjustments. To avoid eye discomfort while looking into the lenses, reduce
the contrast and gradually increase the brightness level until the raster becomes visible on the face of the CRT.
ENTER
will select green raster shift adjustment.
EXIT
returns to Random Access Adjustment mode
menu.
Select with
or
GEOMETRY
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM(N-S)
H & V SIZE
V LINEARITY
BLANKING
then <ENTER>
<EXIT> to return
ENTER
continues to geometry menu
Use Right arrow
to correct
Use Left arrow
to correct
50
H PHASE
><
50
H PHASE
><
For external sources :
If the raster shift is correctly adjusted, the H Phase text box is projected in the lower center of the raster. At that moment, the
' >< ' icon indicates the center of the raster.
Adjust the H phase control until the middle of the projected image is equal with the center of the ' >< ' icon.
Note : If the genlocked pattern was selected, the external source will be displayed.
A bar scale and a value (between 0 and 100) on the screen give a visual indication of the horizontal phase adjustment.