![background image](http://html1.mh-extra.com/html/barco/r9002370/r9002370_owners-manual_4229649013.webp)
Locations and Functions of Controls
R5975809 BARCO CINE 6 ___________________________________________________________________________________
2-3
Star Key
:
When a RF-tuner is built in (option), this is used to toggle between Video and tuner signal.
ADJ.
:
adjust key, to enter or exit the adjustment mode.
Address key
(sunk key)
:
to enter the address of the projector (between 0 and 9). Press the address key, followed
by pressing one digit button between 0 and 9.
STBY
:
stand by button : - to initiate remote power up operation
- to stop projection without main power off.
Pause
:
to blank the image, press PAUSE. The image disappears but full power is retained for
immediate restarting.
Mute
:
The picture stays while the audio is turned off. The power for the amplifiers stays.
Help
:
On line help information (not yet available)
Digit buttons
:
Direct input selection
Audio control
:
use these buttons to obtain the desired level (see also 'Controlling') for each audio
function
Picture controls
:
use these buttons to obtain the desired level (see also 'Controlling') for each picture
function.
TEXT
:
During Video or RGB operations : when adjusting one of the image controls, the displayed
bar scale can be removed by pressing 'TEXT' key first. To re-display the bar scale on
the screen, press 'TEXT' key again. 'TEXT' key is only active in operational mode. When
'TEXT' key is off, no warning message will be displayed. When in Tuner mode : this key
is used to activate teletext.
Freeze
:
When in teletext mode, (only when the tuner options installed) this key is used to freeze
the actual page.
Enter
:
to start up the adjustment mode or to confirm an adjustment or selection in the adjustment
mode.
Exit
:
to leave the adjustment mode or to go back to the previous menu when in the adjustment
mode.
Control keys
:
to make menu selections when in the adjustment mode. Also allows to increment or
decrement an adjustment in the adjustment mode.
= up arrow in the menus.
= down arrow in the menu.
= right arrow in the menus.
= left arrow in the menus.
RC operating indication :
lights up when a button on the remote control is pressed. (This is a visual indicator to
check the operation of the remote control).
Function keys
:
Direct access keys for certain menu functions.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17