Barco R9001500, Руководство пользователя

Страница: 17 / 86

3-3
Installation Guidelines
5976070 BARCO ELM G10 18012000
The mounting position shown in the above images are shown for a nominal lens position.
When putting the projector on the 3 adjustable feet, use these feet to level the projector by turning these feet in or out.
Definitions of the Abbreviation on drawings
B = Distance between ceiling and top of the screen or between floor and bottom of the screen.
A = 344 mm , distance from the middle of the lens (in nominal position) to bottom side of the projector. A shift of ± 20 mm up down
is possible.
CD = Total distance between projector and ceiling or projector and floor.
SW = Screen width.
SH = Screen height (image height).
PD = Projector Distance, distance between screen and projector.
Warning on Rotating the Projector
Screen
PD
B
Ceiling
Projector
CD
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
CEILING VIEW
SW
Ceiling
&HLOLQJ7RSVLGHIDFLQJIORRU
A
CD = SH/2 + B - A
Screen
PD
B
Ceiling
Projector
CD
SH
Optical axis projection lens
SH
SW
SIDE VIEW
BACK VIEW
Screen
CEILING VIEW
SW
Ceiling
&HLOLQJ7RSVLGHIDFLQJFHLOLQJ
A
CD = SH/2 + B + A - 554mm
When the lamp casing is installed, it is not allowed to rotate the projector clockwise when facing the lenses. An internal tilt switch
will provide to start up the projector.
Correct way of rotating the projector, see image 6a.
Image 4
Image 5
Image 6
Image 6a