Barco R9001500, Руководство пользователя

Страница: 19 / 86

3-5
Installation Guidelines
5976070 BARCO ELM G10 18012000
5 Place the lamp casing on the optical base plate (image 9).
6 Push the lamp casing forward until the lamp slide fully into the projector (image 10 & 11). Both center pins (image 12) must match
both center holes.
7 Secure the correct position by turning both bolts a quarter clockwise (image 13).
8 Reinstall the projector side panel.
Remark :
No electrical connections have to be made while installing the lamp casing. All connections are automatically made while inserting
the lamp casing.
Note : While starting up the projector, the electronics detect if a lamp is installed. If no lamp is installed, it is not possible to start up
the projector.
When transporting the projector :
1 Switch the projector to stand by.
2 Let cool down the projector for at least 15 minutes.
3 Switch off the projector and unplug from the wall outlet.
Image 13
Image 9
Image 10
Image 11
$
Image 12