![background image](http://html1.mh-extra.com/html/barco/r9001330/r9001330_owners-manual_4218325071.webp)
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
11-6
11-6
up or down to scroll to desired digit. When finished press
ENTER
to
confirm.
c. counting up or down by pushing the control disk to the right or to
the left.
How finding the correct values for the displayed item?
During the installation of a file with LOAD, the horizontal period, the
total number of vertical lines and the interlaced mode are automati-
cally measured and filled in in the menu table. These values will be
available when starting up the EDIT procedure of an active file.
Select first
"Horizontal"
and press
ENTER
to display a full image.
If the value for
"Horizontal total pixels"
is wrong, sampling mistakes
(small vertical bars in the projected image) will be seen in the image.
Select "Total" and adjust the pixel quantity. Adjust for zero bars (hint
: if the number of bars increase, adjust in the other way).
The active pixels : determine the width of the window on the screen.
This value is normally given in the source specifications. If not, adjust
until full image is displayed (no missing pixels).
Horizontal shift : to shift the image on the screen.
Horizontal period : already filled in with the correct value when active
file.
Press
EXIT
to return to the normal Edit file menu.
Select
"Vertical"
by pushing the control disk up or down and press
ENTER
. The full image is displayed.
The
"Vertical Total lines"
are already filled when an active file is
selected to be edited.
The
"Active lines"
: number of horizontal lines determining the height
of the projected image. This value is normally given in the specifica-
tion of the source. If not, adjust until full image height is displayed (no
missing lines)
Vertical shift
: shift the image up and down (push joy stick up or down)
on the screen until the correct image position is obtained.
Interlaced [On] or [Off]
: this selection is automatically filled when
active file has to be edited. If the image is wrong due to
mismeasurement, use the ENTER key to toggle between [On] and
[Off]. (for interlaced images, 1 frame contains 2 fields).
Read AMDS
AMDS = automatic mode detection & synchronisation
During the installation of a file with LOAD, the system automatically
measured the horizontal period, the total vertical lines and the
interlaced mode.
When selecting Read AMDS, the system remeasures the above
indicated items.
up or down to scroll to desired digit. When finished press
ENTER
to
confirm.
c. counting up or down by pushing the control disk to the right or to
the left.
How finding the correct values for the displayed item?
During the installation of a file with LOAD, the horizontal period, the
total number of vertical lines and the interlaced mode are automati-
cally measured and filled in in the menu table. These values will be
available when starting up the EDIT procedure of an active file.
Select first
"Horizontal"
and press
ENTER
to display a full image.
If the value for
"Horizontal total pixels"
is wrong, sampling mistakes
(small vertical bars in the projected image) will be seen in the image.
Select "Total" and adjust the pixel quantity. Adjust for zero bars (hint
: if the number of bars increase, adjust in the other way).
The active pixels : determine the width of the window on the screen.
This value is normally given in the source specifications. If not, adjust
until full image is displayed (no missing pixels).
Horizontal shift : to shift the image on the screen.
Horizontal period : already filled in with the correct value when active
file.
Press
EXIT
to return to the normal Edit file menu.
Select
"Vertical"
by pushing the control disk up or down and press
ENTER
. The full image is displayed.
The
"Vertical Total lines"
are already filled when an active file is
selected to be edited.
The
"Active lines"
: number of horizontal lines determining the height
of the projected image. This value is normally given in the specifica-
tion of the source. If not, adjust until full image height is displayed (no
missing lines)
Vertical shift
: shift the image up and down (push joy stick up or down)
on the screen until the correct image position is obtained.
Interlaced [On] or [Off]
: this selection is automatically filled when
active file has to be edited. If the image is wrong due to
mismeasurement, use the ENTER key to toggle between [On] and
[Off]. (for interlaced images, 1 frame contains 2 fields).
Read AMDS
AMDS = automatic mode detection & synchronisation
During the installation of a file with LOAD, the system automatically
measured the horizontal period, the total vertical lines and the
interlaced mode.
When selecting Read AMDS, the system remeasures the above
indicated items.