![background image](http://html1.mh-extra.com/html/barco/r9001330/r9001330_owners-manual_4218325100.webp)
Service Mode
5975288 BARCOGRAPHICS 8200 110497
13-5
Service Mode
5975288 BARCOGRAPHICS 8200 110497
13-5
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
MORE...
Identification
To display the Identification sreen, push the control disk up or down to highlight
Identification
and press
ENTER
to display the
Identification
screen.
The Identification screen gives an overview of :
- type of projector
- projector address
- software version
- installation configuration
- baud rate
- text ON
- projector serial number
- projector run time
-
type
of projector : BARCOGRAPHICS 8200
-
software version
-
Proj. Address
: to change the address of the projector, see Change Projector Address
in this chapter.
-
Installation
: possible installations :
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
To change the installation configuration follow the instructions in chapter Installation Set
Up.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
MORE...
Identification
To display the Identification sreen, push the control disk up or down to highlight
Identification
and press
ENTER
to display the
Identification
screen.
The Identification screen gives an overview of :
- type of projector
- projector address
- software version
- installation configuration
- baud rate
- text ON
- projector serial number
- projector run time
-
type
of projector : BARCOGRAPHICS 8200
-
software version
-
Proj. Address
: to change the address of the projector, see Change Projector Address
in this chapter.
-
Installation
: possible installations :
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
To change the installation configuration follow the instructions in chapter Installation Set
Up.