![background image](http://html1.mh-extra.com/html/barco/r9001330/r9001330_owners-manual_4218325128.webp)
Appendix E : Source Number 90 - 99
5975288 BARCOGRAPHICS 8200 110497
E-1
Appendix E : Source Number 90 - 99
5975288 BARCOGRAPHICS 8200 110497
E-1
Source numbers 90 - 99
These source numbers do not correspond to physical inputs. They can only be used when
the projector is equipped with a RCVDS 05 or VS05. An additional adjustment file can be
created for these source numbers. This file can contain different settings. The relationship
between sources 0 - 9 and 90 - 99 is shown in the diagram below.
source input 1
source number 1
source number 91
file A
file A'
source input 2
source number 2
source number 92
file B
file B'
source input 3
source number 3
source number 93
file C
file C'
source input 9
source number 9
source number 99
file I
file I'
Follow the steps below to create a second file for sources 0 to 9 :
1. Select the source between 0 and 9.
2. Select the corresponding source number between 90 and 99 with the digit keys on the
RCU.
3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4. Save the file and exit the adjustment mode.
Source numbers 90 - 99
These source numbers do not correspond to physical inputs. They can only be used when
the projector is equipped with RCVDS 05 or VS05. An additional adjustment file can be
created for these source numbers. This file can contain different settings. The relationship
between sources 0 - 9 and 90 - 99 is shown in the diagram below.
source input 1
source number 1
source number 91
file A
file A'
source input 2
source number 2
source number 92
file B
file B'
source input 3
source number 3
source number 93
file C
file C'
source input 9
source number 9
source number 99
file I
file I'
Follow the steps below to create a second file for sources 0 to 9 :
1. Select the source between 0 and 9.
2. Select the corresponding source number between 90 and 99 with the digit keys on the
RCU.
3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4. Save the file and exit the adjustment mode.