Barco R9001300, Руководство пользователя

Страница: 45 / 54

Service Mode
10-5
5975948 RETRODATA 2100 210198
Lamp Run Time History
To get an overview of the different lamp run times, highlight Lamp
Run Time History by pressing the control disc forwards or back-
wards and press ENTER .
ENTER displays the Lamp Run Time History menu.
EXIT returns to the adjustment selection menu.
A listing with the lamp serial number and the corresponding run
count will be displayed.
The actual installed lamp will be marked.
Press EXIT to return to the service mode selection menu.
Select with ê or é
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
PRESET INPUT BALANCE
MORE ...
LAMP RUNTIME HISTORY
Serial No Run count
-----------------------------------------------------
> 0111121 600
0110031 750
0110010 745
-----------------------------------------------------
<EXIT> to return
Preset Input Balance
Highlight the Black Balance by pressing the control disc forwards
or backwards and press ENTER to select.
With the Black Balance adjustment, the black level of the red and blue
channels can be adjusted in comparison with the green channel.
Use the control disc forwards or backwards to change Red or by
pressing to the right or to the left to change Blue.
Press EXIT to return to the Preset Input Balance menu.
High light the White Balance by pressing the control disc forwards
or backwards and press ENTER to select.
With the White Balance adjustment, the gain of the red and blue
channels can be adjusted in comparison with the green channel.
(To adjust the gain of the complete video signal, use the contrast
adjustment).
Use the control disc by pressing forwards or backwards to change
Blue or by pressing to the right or to the left to change Red.
Press EXIT to return to the Preset Input Balance menu.
Depending the pixel frequency of the connected source, 3 different
filters are selected : VIDEO, VGA, XGA or no filter (if Scale [1:1] is
selected in the geometry menu). For each of these filters, the Preset
Input Balance settings are memorised separately. During the
adjustment, the used filter is indicated.
Select with ê or é
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUN TIME HISTORY
PRESET INPUT BALANCE
MORE ...
PRESET
INPUT BALANCE
FILTER : XGA
BLACK BALANCE
WHITE BALANCE
Select with ê or é
then <ENTER>
adjust red with ê or é ,
blue with è or ç
<EXIT> to return.
Change Language
Highlight Language by pressing the control disc forwards or
backwards and press ENTER to select the Language Selection
menu.
For the moment, only English is available.
ENTER displays the Change Language menu.
EXIT returns to the adjustment selection menu.
Select with ê or é
CHANGE LANGUAGE
ENGLISH
Select with ê or é
then <ENTER>
<EXIT> to return.
SERVICE
CHANGE LANGUAGE
75 Ω TERMINATION
DIMMING
I
2
C DIAGNOSIS
MORE ...