4-4
Input Connections
5975948 RETRODATA 2100 210198
$8',2287
$8',2,1&
$8',2,1%
$8',2,1$
9,'(2
9,'(2
69,'(2
5*%+&9
5*%+&9
/5
/5
/5
/5
,5
5
5
*
*
%
%
+&
+&
9
9
72/2&$/&21752/21/<
3257
3257
3257
3257
3257
2KP:
/5
$XGLR$PSOLILHU
+'799&5
Permanent hardwire connections allowing operation
of front local control panel,internal loud speakers
& front input sockets
$8',2287
$8',2,1&
$8',2,1%
$8',2,1$
9,'(2
9,'(2
69,'(2
5*%+&9
5*%+&9
/5
/5
/5
/5
,5
5
5
*
*
%
%
+&
+&
9
9
72/2&$/&21752/21/<
3257
3257
3257
3257
3257
2KP:
/5
% $ 5&2 LQWHUIDFH
$XGLR$PSOLILHU
Permanent hardwire connections allowing operation
of front local control panel,internal loud speakers
& front input sockets
4. Connecting a RGB analogue source to port 5
RGB analog input terminals with automatic sync detection. Sync can
be separate Horizontal and Vertical sync (RGB-HV), Composite sync
(RGB-S) or Sync signals on green (RGsB).
Always use an interface when a computer and local monitor have
to be connected to the projector. Recommended interfaces to be
applied:
Universal analog interface.
Order number : R9826100.
RGB 120 MHz analog interface.
Order number : R9826570.
VGA interface
Order number 120V : R9828079.
Order number 230V : R9828070
MAC interface
Order number 120V : R9828059
Order number 230V : R9828050
MAGIK interface
Order number 120V : R9828129
Order number 230V : R9828120
RGBS/RGsB analog : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if sync on green
Vert. sync : 1 Vpp to 4 Vpp ± 3 dB
Hor. sync / Composite sync : 1 Vpp to 4 Vpp ± 3 dB
All inputs are non-floating inputs.
All input signals can be 75 ohm terminated via soft switches
(see also Service mode).
Connect the possible audio input signals for source 5 to the
AUDIO C input when the audio lock is OFF (see also chapter
"Controlling")
RGB input selection :
For port 5, press digit button 5 on the RCU.
If the sync input is a composite video signal, select the inputs as
follows :
For port 5, press digit button 9 on the RCU.
3. Connecting a RGB3S analogue source to port 5.
Connect your RGB signals with Tri-level sync, e.g. a professional
VCR to the RGB input terminals of port 5.
RGB3S/RG3sB analog : 5 x BNC
Red : 0.7 Vpp ± 3 dB
Blue : 0.7 Vpp ± 3 dB
Green : 0.7 Vpp ± 3 dB
1 Vpp ± 3 dB if Tri-level sync on green
Vert : 1 Vpp to 4 Vpp ± 3 dB
Hor : Tri-level sync / Composite Tri-level sync:
1 Vpp to 4 Vpp ± 3 dB
All input signals can be 75 ohm terminated via soft switches (see also
Service mode).
Connect port 5 to the AUDIO C input when the audio lock is OFF (see
also chapter "Controlling")
Input selection :
For port 5, press digit button 7 on the RCU.
