Barco PULSAR BG, Руководство пользователя

Страница: 123 / 126

P
ULSAR
BG Dual Composite IF Outputs
Page 3
3.1.2 Installation On The Audio Subc Position
The installation on this position is only carried out if the default position, namely the CIF Aux Input
location , is already occupied. Consequently, it is not possible anymore to install a BTSC encoder
option or Audio Subcarrier Board because the available space inside the unit will be occupied by the
CIF Aux Input Board, the Dual CIF Outputs Board and the Interconnection Board.
•
Loosen cable 24 at the CIF input of the converter and connect the cable to J1 (CIF IN) of the
Dual CIF Outputs Board.
•
The main output of the Dual CIF Outputs Board must be connected with the CIF input of the
converter with cable 74.
•
Mount cable 75 between J5 (aux output of the Dual CIF Outputs Board) and the rearplate.
(position Ifs2). Stick a label called ‘AUX CIF’ on the old label Ifs2.
•
The CT cable for power feeding and data connection:
•
Connect the interconnection board with J21 of the mainboard and to J2 of the Dual CIF Out-
puts board.
Closing the P
ULSAR
Before closing the unit, check once more all the cables and connectors. A badly fixed connector could
take a lot of troubleshooting time. Also, use the cable ties to fasten the cables in a decent way.
- Replace the top cover on the P
ULSAR
chassis.
- Screw down the top cover with the 9 screws.