![background image](http://html1.mh-extra.com/html/barco/overview-d-series/overview-d-series_user-manual_4198086070.webp)
7. Maintenance and servicing
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 04 - April 2005
________________________________________________________________________
7-9
7.3.2
Unpacking a lamp module
The packaging product uses a strong, highly-resilient low-slip film to surround the lamp module, protecting it
from shock and vibration.
The lamp module is packed between two layers of highly resilient low-slip film. The resilient suspension film is
tough and retains its effectiveness for return shipments and multiple uses.
To ensure that the lamp module is held securely in place the upper layer is pressed against the lamp module and
will pop up when the adhesive tape of the package is removed. Do not jump!
To ensure that the lamp module is held securely in place the upper layer is pressed against
the lamp module and will pop up when the adhesive tape of the package is removed. Do not
jump!
Caution: Don't touch the glass top of the reflector!
Place the cardboard box upright according to the instruction printed on the
box.
Remove the adhesive tape. Be aware that the upper layer will pop up!
Open the box and remove the upper layer.
Take hold of the lamp and lift it out.
Take care that you don't touch the glass top of the reflector!
Now you can insert the lamp as described in the following chapter
If you accidentally made any fingerprints on the glass top of the reflector, clean the glass top
with alcohol before inserting the lamp module!
After the lamp is removed, put the upper layer back in the box. Save the entire
package in case the lamp has to be shipped again.
To ship the lamp module, use the original package and re-pack the lamp module between the
two layers of highly resilient low-slip film.
To pack the lamp module, proceed in the reversed order, please! Don't touch the glass top of
the reflector! Take hold on the fitting and place the lamp module upside down onto the lower
layer. Press the upper layer firmly against it, "opening" on top side, and close the box with
adhesive tape!
Содержание OverView D Series
Страница 1: ...User s manual OverView D series...