Barco Nio MKII, Инструкция по установке и эксплуатации

Страница: 60 / 131

BarcoMed Driver Tab
60 Nio MKII
devices. If you enable DirectDraw, your application will have the choice
of using DirectDraw or GDI. If you disable DirectDraw, your application
will use GDI instead of DirectDraw. Please note that in any case, your
application can always use BarcoMed driver functions (i.e. WinBarco) or
other graphics extensions (such as OpenGL). DirectDraw is enabled by
default.
Enable Dithering
This option allows the user to enable or disable dithering. Dithering is a
technique for increasing the perceived range of colors in an image at
the cost of spatial resolution. Adjacent pixels are assigned differing color
values; when viewed from a distance, these colors seem to blend into a
single intermediate color. The technique is similar to the half-toning
used in black-and-white publications to achieve shades of gray. Please
note that this option is only available when the User Modifiable Palette
Mode is selected. This is because dithering is only supported under
Windows when the display is palletized. If either the “Static Gray Palette
including Standard System Colors” mode or the “Static Gray Palette with
NO System colors” mode is selected, the “Enable Dithering” check box
will be grayed-out, and dithering will be automatically disabled
regardless of whether this check box is checked. This complies with the
Windows standard interface method.
Monitor Configuration
Note:
If the options in this section are grayed out, then they are
not available for the model controller with which you are working.