Barco Nio MKII, Инструкция по установке и эксплуатации, Страница: 105 / 131

General tips
Nio MKII 105
Setting the resolution of your
Nio
display
Note:
In order to set the resolution of your
Nio
you must be
logged in using an account with administrator privileges.
No image during PC start-
up • Check the CMOS settings in the PC
BIOS
Nothing happens when
you press or rotate the
control wheel • The User Controls may be disabled.
Please read the paragraph about
the “User Controls” function.
The image is non-propor-
tionally spread out over
the screen • Select another resolution in the
Windows “Display Properties”
control panel
The image on the screen
is rotated 90° • Select another resolution in the
Windows “Display Properties”
control panel
The previous image
remains slightly visible on
the screen • This phenomenon, called “image
sticking” is normal if the same
image has been on the screen for a
long time. The ghost image will
disappear after some time.
Over 10 hours operation with the
same image content is not
recommended. Switching on the
display DPMS may decrease the risk
of image sticking.
• A slight case of image sticking can
be solved by continuously
displaying a full white image during
a number of hours.
On a dual-head system,
the images on the left
and right display seem to
be switched • Switch the video cables at the
display controller or at the display
video inputs
Problem description Possible tests or solutions