Barco Nio MKII, Инструкция по установке и эксплуатации

Страница: 51 / 131

NioWatch
Nio MKII 51
5.
When the Wizard has finished installing the NioWatch software it
will ask you if you want to read the Release Notes now. Click “Yes”
or “No” to continue.
6.
When the InstallShield Wizard Complete Screen appears click
“Finish”.
7.
Click “Finish” on the BarcoMed Product Installation screen to
complete the install process.
Note: Silent mode installation
You can install NioWatch in silent mode on a system where no previous
version of NioWatch is installed.
Silent mode means that no user intervention is required during
installation.
To install NioWatch in silent mode:
1.
Open the command prompt (DOS window) in Windows.
2.
Using DOS commands, navigate to the folder containing the
NioWatch setup.exe file on the CD-ROM.
3.
Type: “setup.exe_/s_/v/qn” (where “_” represents a space)
Barco LCD sensor installation
In case you will be using the Barco LCD sensor with your system, you
may have to install its driver.
The Barco LCD sensor is a USB device. Connect the sensor to a free USB
downstream connector.
When you connect the sensor for the first time, the “New hardware
found” wizard starts.
In that case, locate the appropriate driver file (.inf file) on the NioWatch
CD-ROM in the folder “BarcoLCDSensor”.