Barco Nio Fusion12MP, Руководство пользователя

Страница: 39 / 66

39 R5913350 /02 Nio Fusion 12MP
4.26 Display info
About display info
Your display serial number, native resolution, firmware versions, etc. are available in a dedicated submenu of
the OSD menu.
To retrieve info about your display:
1. Bring up the OSD main menu.
2. Navigate to the About this Display menu to make the information visible on the screen.
4.27 Display status
About display status
The Status submenu of the OSD menu provides info on the current status of your display (runtimes,
temperatures, etc.), the status of the connected image sources (video encoding mode, timings, etc.) and the
current calibration status of your display (display function, luminance, ALC, etc.).
To retrieve the status of your display:
1. Bring up the OSD main menu.
2. Navigate to the Status menu.
3. Enter the Display, Image Sources or Calibration submenu as desired.
4.28 SteadyColor ™
About SteadyColor
Barco ’ s SteadyColor technology was created to achieve consistency and perceptual linearity in the display of
color images. With multiple internal sensors, the display parameters are constantly monitored and adjusted to
ensure that the perceptual difference between colors is proportional with their Digital Driving Level (DDL)
difference.
To enable SteadyColor
SteadyColor is controlled via Barco ’ s QAWeb Enterprise software (or the older MediCal QAWeb).
To register to QAWeb Enterprise (or to install the older MediCal QAWeb), see “ QAWeb registration ” , page 16.
The QAWeb Enterprise user guide describes how to enable and configure SteadyColor on your display.
4.29 Maximum luminance demo
About maximum luminance demo
The maximum luminance demo sets the luminance of the LCD panel to its maximum value for 60 seconds, or
until the demo is manually cancelled. The actually measured luminance is shown on-screen.
While activated, the maximum luminance demo disables the display ’ s uniformity correction and sets
the Color Preset to Native White . When the maximum luminance demo is cancelled, the original
settings are restored.
To activate the maximum luminance demo
1. Bring up the OSD main menu.
2. Navigate to Enable Service mode .
Advanced operation