15
R5913350 /05
Nio Fusion 12MP
Power on the display system
1.
Set the power switch next to the mains power input connector in position “I” .
2.
Press the jog dial to activate your display.
3.
Switch on the workstations connected to your display.
Your display will be running in a basic video mode at a default refresh rate when first time starting up.
Install the MXRT driver and Intuitive Workflow Tools
When using a Barco MXRT display controller, install the
MXRT driver
and
Intuitive Workflow Tools
on
both
connected workstations. Barco’s Intuitive Workflow Tools are designed to increase visibility of subtle details,
improve focus during reading sessions, and accelerate workflow.
1.
Download the latest MXRT driver and Intuitive Workflow Tools from
2.
Install the MXRT driver and Intuitive Workflow Tools as described in the Barco “Display Controller and
Intuitive Workflow Tools” user guide on the included documentation CD, or at
Adjust EDID format and timings
The EDID format must be set to
DisplayID 1.3
and the EDID resolution timing must be set to
12MP
(i.e. 4200 x
2800) for both DisplayPort inputs in order to drive the full screen resolution from one DisplayPort video cable.
1.
Bring up the OSD main menu.
2.
Navigate to
Configuration > Image Sources > Input Settings > EDID format
.
3.
Select
DisplayID 1.3
and confirm.
4.
Navigate to
Configuration > Image Sources > Input Settings > DisplayPort 1 > EDID > Resolution
.
5.
Select
12MP
and confirm.
6.
Navigate to
Configuration > Image Sources > Input Settings > DisplayPort 2 > EDID > Resolution
.
7.
Select
12MP
and confirm.
Enable the KVM switch
1.
Bring up the OSD main menu.
2.
Navigate to the
Configuration > Image Sources
menu.
3.
Enter the
KVM Input Selection
submenu.
4.
Select
Enabled
and confirm.
When enabling the KVM switch, the
Image Source Selection
menu will be inaccessible. In addition,
Hibernate
will be disabled to guarantee correct USB port switching also when one or both
workstations are in sleep mode.
To switch KVM inputs
1.
Press or turn the jog dial to activate the shortcut bar. The KVM switch icon (
) is now selected by
default because the KVM switch is enabled.
2.
Press the jog dial again to switch KVM inputs.
During normal operation, double-press the jogdial to switch KVM inputs more quickly. A first click will
make the shortcut bar pop up, a second click will switch inputs (since the KVM switch icon is
selected by default when the KVM switch is enabled).
When switching KVM inputs, the video is switched instantly while switching the USB signal might
take a little longer (up to 2 seconds).
Содержание Nio Fusion 12MP
