5. Advanced operation
5.11 Luminance target
About the luminance target
The luminance target of your Coronis 5MP LED Display is adjustable over a prede
fi
ned range. When you
change the luminance target, the display will adjust its backlight to reach the target.
To set the luminance target:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Calibration
menu.
3. Enter the
Luminance Target
submenu.
4. Set a luminance target value as desired and con
fi
rm.
The default, factory DICOM calibrated luminance value is available in the technical spec-
i
fi
cations table. The guaranteed backlight lifetime is valid for this setting.
5.12 Viewing modes
About viewing modes
The Coronis 5MP LED Display can be used in two viewing modes:
Diagnostic
This mode provides the full calibrated luminance
and is intended for using the display for diagnostic
purposes.
Text
In this mode, the luminance is reduced to
approximately half of the luminance. This
is intended for using the display with of
fi
ce
applications such as word processing.
Please note that text mode is not persistent, once
powered off, the unit will restart in diagnostic mode.
To quickly switch the viewing mode without having to enter the OSD menu, touch the
left and right key (the two leftmost buttons) at the same time during normal operation.
As the Coronis 5MP LED Display is intended to be used in a diagnostic environment,
the diagnostic mode should always be selected.
To select a viewing mode:
1. Bring up the OSD main menu.
2. Navigate to the
Con
fi
guration > Calibration
menu.
3. Enter the
Viewing Mode
submenu.
4. Select
Diagnostic/Text
as desired and con
fi
rm.
K5902074 CORONIS 5MP LED DISPLAY 19/12/2014
23
