BARCO 1
Projection Systems
QFD(3.4-4.5:1) Lens R9840060
What has to be
done
This new lens has to be installed on a 6000 series projector
Necessary Tools
no tool necessary
Installing the
Lens
To install the lens, follow the next procedure or look into the owners manual :
1
2
3
4
5
6
7
1
2
2
2
Take the lens out of its packing material.
Open the lens cover of the projector.
Open both lens locks (B) by pulling them backwards.
Unlock first by pulling clip (A) forwards.
Put the lens on the lens holder.
Fix the lens by closing both locks (B) until they are secured.
Plug the wires of motor unit into the connector (C).
Reinstall the lens cover.
Step
Action
Image
To be continued on next page.
Warning !
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
Attention
The motor unit (A) (image 3 on next page) should be equipped with an extra socket to
allow the connection of the lens motor unit. If the motor unit is not equipped with this
extra socket, contact a Barco service center.
