Barco iQ G300, Руководство пользователя

Страница: 82 / 94

Installation Menu
13-4 5976367 BARCO IQ-G300 24092001
How to change the Common RC5 address ?
1 Press MENU to activate the Toolbar
2 Use è to select the Installation item
3 Press ê to Pull down the Installation menu
4 Press ê to select Projector address
5 Press ENTER to select the item (menu 2)
6 A dialogbox appears on the screen (Image 5)
7 Press ê to select Common RC5 address
8 Press ENTER to enable changing (Image 6)
Entering the new Common address
Enter the new common address with the digit keys on the RCU, the local keypad or the cursor keys (see "Using the dialogboxes"
in Chapter "Getting started")
That address must be 0 or 1.
Orientation
Projector orientations
Depending on how the pojector is oriented the projector's internal settings have to be adapted.
For more info about the different orientations see chapter "Installation guidelines".
How to change the orientation ?
1 Press MENU to activate the Toolbar
2 Use è to select the Installation item
3 Press ê to Pull down the Installation menu
4 Press ê to select Orientation
5 Press è to pull down the Orientation menu
6 Use é
or
ê to select the desired configuration (menu 3)
7 Press ENTER to confirm the change
The projection is adapted and a black bullet shows the active configuration.
Projector RC5 address
3URMHFWRUDGGUHVVHV
Common RC5 address
0
0
Projector RC5 address
3URMHFWRUDGGUHVVHV
Common RC5 address
0 0
0
Image 4 Image 5
menu 3