Barco iQ G300, Руководство пользователя

Страница: 19 / 94

3-5
Installation Guidelines
5976367 BARCO IQ-G300 19092001
How to remove the lens?
To remove the lens, follow the next procedure :
1. Slide the lensdoor to the left (image 5).
2. Unlock the lens by pulling the handle located on the right side of the projector (image 6).
3. Remove the lens out of its housing (image 7)
Cleaning the Lens
To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations
for cleaning the lens. It is recommended to remove any material from the lens by blowing it off with clean, dry deionized air. DO NOT
use any liquid to clean the lenses.
A Toraysee TM cloth is included in the lens kit.
Proceed as follows :
1. Always wipe lenses with a CLEAN Toraysee TM cloth.
2. Always wipe lenses in a one direction. Do not wipe back and forwards across the lens surface as this tends to grind dirt into the
coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
5. Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth.
6. Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Order number for a new Toraysee
TM
cloth : R379058.
Other lenses can also be cleaned safely with this Toraysee TM cloth.
Image 5
Image 6
Image 7