Barco ILite, Руководство по установке

Страница: 83 / 110

10. Servicing
10.2 ILite tile diagnostic
Status LED’s re-sync unit
The re-sync unit of the ILite tile is provided with tree status LED’s. One green and two red LED’s. The LED’s are horizontally mounted
with the green LED in the middle. The green LED light up indicating the SMPS is started and the re-sync unit is operating normally.
The red LED’s indicate the status of the sync pulses and the incoming data signal.
Left red LED (A)
Green LED (B)
Right red LED (C)
Image 10-1
A Left red LED.
B Green LED.
C Right red LED.
Left red
LED
Green LED Right red
LED
Diagnostic
Flashing ON OFF ILite tile receives start-up signal on the left I/O port but no sync is present on
the data signal.
OFF ON Flashing ILite tile receives start-up signal on the right I/O port but no sync is present on
the data signal.
Flashing ON Flashing ILite tile receives no start-up signal and no sync is present.
ON ON OFF ILite tile is functioning normal, data signal and sync are received on the left
I/O port.
OFF ON ON ILite tile is functioning normal, data signal and sync are received on the right
I/O port.
OFF ON OFF The power unit of the ILite tile is started but the re-sync unit is malfunctioning.
OFF OFF OFF The power unit of the ILite tile is not started or the resync-unit is malfunctioning.
R5976189 ILITE RENTAL DISPLAY 16/09/2005 79