Barco ILite, Руководство по установке

Страница: 73 / 110

8. Cabling of an ILite display
8.2 Power cabling of an ILite display
Power boxes
Barco provides several types of power boxes. Depending on the size of the ILite rental display you can choose to use the mono
phase power box or the custom made power box or the rental power box. The type of power box, does not influence the power
cabling of the ILite rental display. See installation manual of the concerned power box for installation instructions.
Plug types of power cables
The illustration below shows the three different kinds of plugs used on ILite power cables. Note that the ILite power split cable has
all three different plug types (C13, C19 and C20).
A B C
Image 8-2
A C13 plug. Fits into the C14 power socket of the ILite tile.
B C19 plug (female).
C C20 plug (male).
W
ARNING
:
To protect against risk of fire by overloading of power cables, the amount of ILite rental tiles per
power source cable is limited. Never connect more than 6 ILite rental tiles with a power source cable.
Necessary parts
• Power box(es) with matching cables.
• Power split cables.
How to realize the power cabling of an ILite display ?
1. Install the power box nearby the ILite rental display. Ensure the power box provides as much power circuits as required to
energize the display in a safe manner. If necessary, install several power boxes. See manual of the used power box for installation
instructions.
2. Connect a power source cable coming from the power box with the C20 plug of an ILite power split cable.
Note: Depending on the type of used power box, a multi power cable in combination with a spider connector is inserted between
the power box and the power source cable leading to the power split cable of the first ILite tile. See manual of the used
power box to realize the cabling between power box and ILite display.
3. Connect the C13 plug of the power split cable with one of the tiles in the LED-display. Start with a tile at the bottom.
4. Connect an other power split cable with the previous installed power split cable and plug the C13 plug into the power socket of
the tile above.
5. Repeat step 4 until maximum 6 ILite tiles are connected with the same power source cable coming from the power box.
Warning: To protect against risk of fire by overloading of power cables, the amount of ILite rental tiles per power source cable
is limited. Never connect more than 6 ILite rental tiles with a power source cable.
Tip: Create as much as possible vertical power branches of 6 tiles high. Only include tiles of neighboring columns in case
the power branch is less than 6 tiles high.
6. Repeat from step 2 until all ILite rental tiles are provided with power.
R5976189 ILITE RENTAL DISPLAY 16/09/2005 69