Barco ILite, Руководство по установке

Страница: 45 / 110

7. Basic setup procedures
7.3 Install the ILite rental feet with stacker foot
Necessary tools
• 19 mm open ended spanner.
• 10 mm hexagon Allen key.
• Spirit level.
Necessary parts
• Rental feet (dual or triple or both).
• Two foot beams per rental foot.
• Two hexagon bolts (M12 x 16) per rental foot.
• Two bolts (M12 x 16) per rental foot.
• Two base rails per rental foot.
• Stacker feet (number of rental feet minus one).
• Two stacker level plates (for left and right side of LED-wall).
• Shim plates.
How to install the ILite rental feet with stacker foot ?
1. Place two foot beams (B) parallel on a flat surface per rental foot.
2. Slide the rental foot base rails (A) into the slots of the foot beams.
3. Place the rental feet (C) together with the stacker feet (S) upon the foot beams just above the base rails as illustrated.
Note: The stacker feet (S) is mounted between the foot beams (B) and the rental feet (C). The outermost foot beams does not
contains a stacker foot, but a stacker level plate (R) instead. This to ensure that the rental feet, at the sides of the display,
are flat mounted like the other rental feet.
y
X
X > y
A
B
C
R
S
R
C
E
D
Image 7-4
R5976189 ILITE RENTAL DISPLAY 16/09/2005 41