Barco HDF-W30LP, Руководство пользователя и инструкция по установке

Страница: 117 / 311

13. Input
Image 13-6
SDI, input type selection
The following selections are possible:
•
Input 1 Priority (when 2 sources are present, the source on input 1 will have the priority)
• Input 2 Priority (when 2 sources are present, the source on input 2 will have the priority)
• Input 1
• Input 2
• Dual SDI
SDI setup
To set up the SDI input, select Setup and press ENTER .
Image 13-7
SDI set up
First, select the standard. Use the ▲ or ▼ key to select and press ENTER to accept.
Standard :
•
4:2:2 - YCbCr-10
• 4:4:4 - YCbCr-10
• 4:4:4 - RGB-10
• 4:2:2 - YCbCr-12
• 4:4:4 - YCbCr-12
• 4:4:4 - RGB-12
Then, select the 3G setting. Use the ▲ or ▼ key to select and press ENTER to accept.
3G-A and 3G-B:
•
Direct Mapping (3G-A)
• Dual HD (3G-B)
When Dual HD is selected, it is possible to use Swap links. If Swap links must be used, use the ▲ or ▼ key to select and press
ENTER to accept. The check box will be checked.
R5906730 HDF WLP SERIES 01/08/2017 113