Barco HDF-W30LP, Руководство пользователя и инструкция по установке

Страница: 123 / 311

13. Input
13.8.3 Shutdown settings
How to change the settings
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → No Signal . → Shut-
down .
Image 13-19
No signal, shutdown
2. Press ENTER to toggle between [On] and [Off] .
[On] : projector goes in shutdown after a certain retarding time.
[Off] : projector does not go in shutdown.
13.8.4 Shutdown retarding time
About the shutdown retarding time
The retarding time is the time between no signal is detected and the moment that the projector shuts down.
How to set the retarding time
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → No Signal . → Shutdown
time (min) .
Image 13-20
Shutdown Time
2. Press ENTER to toggle between [1] , [3] , [5] and [10] minutes.
13.8.5 Auto Dimming
About auto dimming
When no signal is detected on the selected input the light source power will be reduced from the current value to its minimum value.
When the input signal is re-detected, the light source power is restored to its original value.
How to set up
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → No Signal . → Auto
Dimming .
R5906730 HDF WLP SERIES 01/08/2017 119