Barco Freya, Руководство пользователя

Страница: 319 / 370

319 R5910032 /00 Freya
Required tools
Vacuum cleaner with soft brush suction nuzzle.
How to vacuum-clean the dust filter?
1. Carefully vacuum the air inlet side of the dust filter. Use a vacuum cleaner with a soft brush suction nuzzle.
The air inlet side of the dust filter is the side which is surrounded with a glue edge.
Tip: Lightly tap the filter on its dusty side to expel heavy dust contamination.
Tip: Compressed air is also permitted to clean the filters but take care not to damage them.
Caution: Do not damage the dust filter. Replace damaged dust filters immediately.
19.5 Washing and drying the dust filters
About filter washing and drying
For environments where popcorn grease and such can contaminate the filters, Barco advises the client to
purchase one extra set of filters to cover drying time, as well as taking following extra precautions and
instructions pertaining to filter cleaning and drying.
Cleansing agent
To clean sticky, greasy dust filters we suggest usage of Sodium carbonate crystals (Na
2
CO
3
). Sodium
carbonate (Often called washing soda , soda crystals , or sal soda in the detergent section of stores) is
widely used to effectively remove oil, grease, alcohol stains … The product itself is relatively safe, sodium
carbonate is used in toothpastes and as a food additive (E500). Potential Hazards are described in the section
“ Hazards ” , page 352.
Image 19 – 5 Sodium carbonate crystals.
This cleaning procedure assumes that the filters are already removed from their slots.
Take into account that the time needed to dry the dust filters may be 24 hours or more. For that, it's
recommended to have a second set of dust filters which can be used while cleaning the first set.
Required tools
• Bucket with hot water
• Sodium carbonate, 30 gram (handful) per liter hot water
How to wash and dry the dust filters?
1. Make a solution with a ratio of 30 gram (a handful) sodium carbonate to 1 liter hot water .
Maintenance procedures