![background image](http://html1.mh-extra.com/html/barco/freya/freya_user-manual_4137593186.webp)
R5910032 /00
Freya
186
9.1 Calibration process overview
Process overview
1.
Create
Lens position files for FLAT and SCOPE
. For more on creating lens files, see
“
2.
If applicable for your projector:
create the necessary amount of 3D files
. For more info on creating 3D
files, see
“
3.
Calibrate the light source, using
white point calibration
. For more info, see also
”
4.
For the light sensor calibration, select the desired aspect ratio by activating the correct lens file.
•
SCOPE
format
•
FLAT
format
5.
Perform Light sensor calibration
and
create LSC files for Flat, Scope and 3D
(if applicable for your
projector). For more info, see
Light sensor calibration (LSC)
6.
Prepare for color calibration in 2D. Set up the correct LSC file and the desired white point target. For more
info on setting white point target, see
7.
Color gamut calibration
(electronic P7 correction). Measured values are saved in the
Measured Color
Gamut Data (MCGD) file
. This calibration needs to be repeated for each used format (FLAT/SCOPE) and
for each used projection mode (2D/3D).
For more info about MCGD files and color gamut calibration, see
“
8.
Verify the corrected colors by comparing to select target colors
. The target colors are stored in
Target Color Gamut Data (TCGD) files
. Several TCGD files are already available in the file system of the
projector.
For more info about TCGD files and verifying colors, see
Verifying the colors after correction
9.
Arrange calibration files in a macro
. To apply correct color calibration it is important that the MCGD file
(s) and matching TCGD file(s) are activated after that the INPUT file and PCF file are activated. For that it
is recommended to create a macro where the files are loaded one by one in the right order:
1. First activate the
INPUT
file.
2. then activate the
PCF
file (PCF already contains plane 1 information),
3. then activate the
MCGD
and
TCGD
files.
For more details on creating macros, see
, page 62.
9.2 Light source
–
White Point calibration
9.2.1 About the light source white point calibration menu
Location & access
Menu: Configuration > Color calibration > Light source
Level: Administrator, Service technician
About white point calibration
The projector uncorrected white point (W
n
) has to be shifted towards the DCI white point (W
t
). The coordinates
of the DCI white point (x
w
=0.314 ; y
w
=0.351) are embedded in the projector software and cannot been
changed. The coordinates of the projector uncorrected white point has to be measured and entered.
Содержание Freya
