Display Controller
35
4
For the display which is still attached click on the Advanced button.
5
Select the Adapter tab and then click on the List All Modes button.
Select the resolution and refresh rate that your B
ARCO
D
ISPLAY
C
ONTROLLER
display supports from the dialog box and click OK.
6
Click OK on the bottom of the Adapter Control Panel.
7
Click Yes when asked, “Your desktop has been reconfigured. Do
you want to keep these settings?”
To set the resolution of the second display attached to the
BarcoMed display controller you are working with, go back to the
Settings tab of the Display Properties Control Panel. If necessary
If you installed your BarcoMed Display System drivers in
SingleView mode, there will be one rectangle for the
virtual display representing the two heads controlled by
each BarcoMed display controller output.
If you installed your BarcoMed Display System drivers in
DualView mode (default for Windows XP) there will be a
rectangle representing each head controlled by each
output of the display controller. This will be true even if
you have only one display connected to your BarcoMed
controller. Both displays of a display controller cannot be
enabled at the same time unless their display properties
match. If necessary detach the second display of the
BarcoMed display controller you are working with by
right clicking on the rectangle that represents it, deselect
Attached and click the Apply button.
Since Windows will not let you detach the primary
display connected to a particular controller, you may need
to temporarily make another display the primary display
In the Adapter box, the Adapter string shows if this
display is the First View or the Second View attached to
the display controller. Please make a note of this, so that
you can arrange the displays in the correct order later if
necessary.
Содержание FirePro 3D Graphics
