Barco FirePro 3D Graphics, Руководство пользователя

Страница: 24 / 76

24 Display Controller
8 Follow the wizard’s on-screen instructions to complete the driver
installation.
The driver installation may take up to 2 minutes, and the monitor
may blink a few times during the installation process.
For “non-English” operating systems, you may encounter multiple
pop-up screens. If this occurs, click the appropriate buttons to
complete the installation.
9 When the “Installation Complete” message appears, select Reboot
System Now and click Finish.
10 After the system reboots, the “Found New Hardware” wizard may
appear. If this occurs, click Cancel.
Automated display configuration
Once the drivers, software and documentation have been installed and
your system has been rebooted, the computer should automatically
detect your Barco displays and attach them to the desktop with the
correct resolution. If the computer
fails to detect your Barco displays or
fails to attach them to the desktop correctly, please refer to the “Setting
the resolution of your B
ARCO
D
ISPLAY
C
ONTROLLER
” on page 34 in the
Configuring Windows section of this manual.
Reinstalling drivers
You can install new drivers or reinstall existing drivers at any time by
using the Barco Set-up wizard on your B
ARCO
Display System Installation
CD-ROM.